Item No.
A202230121
RM 149.90
-
In Stock
4 items left
Description
● Before using for the first time, please disassemble the components and clean or sterilize them separately based on the instructions.
● Do not use corrosive cleaner, chemical solvent, or concentrated detergent.
● Do not soak the host, quick coupling, and power cord in water.
● Do not use corrosive cleaner, chemical solvent, or concentrated detergent.
● Do not soak the host, quick coupling, and power cord in water.
Shipping
Far-infrared Breastshield
The far-infrared breast shield with heated warmth mimics the baby's latch on feeding to boost blood circulation and stimulate milk flow.
Product Parts
Product Assembly
Assembly the pump set
1. Assemble the valve and heating ring on the breast shield.
2. Screw the bottle into the breast shield.
3. Firmly press the air pouch into the connector.
4. Twist connector onto the breast shield while holding the thermal ring.
Complete
Assembling the bottle parts
1.Make sure the sealing disc is snapped into the lid.
2.Twist the lid onto the bottle
Cleaning and Sterilising
|
Washable
|
|
| Relevant Parts |
|
| Before using for the first time |
1. Separate the parts and wash with a mild neutral detergent.
2. Rinse with cold, clean water. 3. Place the parts in a deep pot. 4. Cover with cold water. 5. Boil for 5 mins. (Avoid direct heat exposure from hot metal or flames) 6. Turn off the stove and air dry the parts. 7. Wipe the parts with a clean cloth. 8. Place in a zip-lock bag or sealed container for next use. |
| Once a day |
1. Separate the parts and wash with a mild neutral detergent.
2. Rinse with clean, the parts water. 3. Place the parts in a deep pot. 4. Fill the pot with cold water until the parts fully immerse in water. (You can add a teaspoon of citric acid to prevent the build-u of limescale.) 5. Boil for 5 mins. (Avoid direct heat exposure from hot metal or flames) 6. Turn off the stove and air dry the parts. 7. Wipe the parts with a clean cloth. 8. Place in a zip-lock bag or sealed container for next use. |
| After every use |
1. Separate the parts and wash with a mild neutral detergent.
2. Rinse with cold, clean water. 3. Wipe with a clean cloth until vdry. 4. Place in a zip-lock bag or sealed container ready for use. |
|
Non-Washable
|
|
| Relevant Parts |
|
| Before using for the first time |
Wipe the exterior of the main machine and the parts with a clean cloth.
|
| Once a day |
Wipe the exterior of the main machine and the parts with a clean, damp cloth.
|
| After every use |
If the main machine, quick connector or tubing requires cleaning, wipe them with a clean, damp cloth.
|
◎ The heating rings contain electrical thermal components. DO NOT sterilise this part in the microwave.
◎ Ultraviolet light sterilisation, food colouring etc. can cause discolouration but will not affect the function of the parts.
◎ Only use drinking-quality water for cleaning.
◎ Take apart and wash all parts that come in contact with the breast and breast milk immediately after use to avoid dried milk residue and prevent growth of bacteria.
◎ Ultraviolet light sterilisation, food colouring etc. can cause discolouration but will not affect the function of the parts.
◎ Only use drinking-quality water for cleaning.
◎ Take apart and wash all parts that come in contact with the breast and breast milk immediately after use to avoid dried milk residue and prevent growth of bacteria.
